Situations often arise when it is necessary to organize the pumping of water, diesel fuel or antifreeze in everyday life. Heavy and expensive equipment is not always needed, you can use the original pump, which is connected to the drill shaft and works by rotating the drill. Meet the pump for the VT-87 drilling rig for diesel fuel. The VT-87 drill pump is very compact and takes up very little space.
Packaged in a bright colorful box made in Spain. There is an instruction in Russian. The shaft for the drive is metal, it is easily clamped in the drill chuck. The nozzles are fitted with plugs to prevent debris from entering the pump. The design of this equipment has a shaft with a stainless steel axle for fixing on the drill.
As soon as the drilling motor is turned on and rotation begins, the pump of the BT-87 drilling rig for pumping water, diesel fuel begins to pump oil products, antifreeze or water. The pump performance depends on the rotational speed of the drill. For example, at a drilling motor speed of 1500 rpm, the pumping speed is 20 l / min, and when the drilling rig rotates at a frequency of 2750 rpm, the pumping speed already reaches 35 l / min. You will not be able to use such a device with gasoline, gas, alcohol or kerosene. Diesel, antifreeze and water are particularly suitable for pumping liquids.
Structurally, the BT-87 mud pump for pumping water and diesel fuel, like all fuel dispensers of the Spanish brand Gespasa, is a self-priming pump. It is classified as eccentric and self-adjusting blades.
The mud pump for pumping water and diesel fuel BT-87 will be able to lift liquid to a depth of 2.5 m (this is an indicator that is called "dry" suction in the classifiers of fuel equipment), the power of the drilling engine determines the distance that the pump can pump liquid (possibly up to 25 m). Materials used for manufacturing, shockproof and anti-corrosion. Shaft, axis - stainless steel. Roller and blades are made of environmentally friendly and non-toxic plastic, which does not damage the liquid when in contact during pumping. Connecting holes - with a thread diameter of 25 mm (corresponds to a hole diameter of 1 inch).
Dimensions 130 x 90 x 66 mm. Country of origin - Spain.
Type - equipment for pumping fuels and lubricants. Fuel type - diesel fuel. Weight - 0.45 kg. Dry suction height -2.5 m. Outlet pressure - 2 bar.
Time of continuous work - min. Power supply - from drill B.
Productivity - 20-35 l / min. Height - 6.6 cm.
The item "Fuel Transfer drill Pump for pumping water, diesel, Gas, Gasoline, Kerosene BT8" is in sale since Thursday, April 1, 2021. This item is in the category "Business & Industrial\Fuel & Energy\Oil & Gas\Dispensers & Accessories". The seller is "monja07" and is located in Nikolaev.This item can be shipped worldwide.